Tribunol Eurotruck CK-4 10W-30
Commercial vehicle engine oil of the premium class, specially developed for the latest high-performance engines, but can also be used in cars according to API. The application profile meets the long change intervals of the vehicle manufacturers and represents the current status in this SAE class. It is also for the rationalized Application predestined.
SAE 10W-30
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-30
ACEA E9/E7
API CK-4, CJ-4/SN
MAN M3275, MAN M3575 MB 228.31
Ford WSS-M2C171-E Volvo VDS-4.5
Ford WSS-M2C171-F1 Volvo VDS-4
Cummins CES 20081 MTU DDC
Cummins CES 20086 Type 2.1
Cummins CES 20087 Caterpillar
Detroit Diesel DDC 93K218 ECF-3a
Detroit Diesel DDC 93K222
Detroit Diesel DDC 93K223
Mack EO-O Premium Plus
Mack EO-S-4.5
Renault RLD-3
Renault RLD-4
Deutz DQC III-10 LA
Tribunol Eurotruck CK-4 10W-40
Commercial vehicle engine oil of the premium class, specially developed for the latest high-performance engines, but can also be used in cars according to API. The application profile meets the long change intervals of the vehicle manufacturers and represents the current status in this SAE class. It is also for the rationalized Application predestined.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA E9/E7
API CK-4, CJ-4/SN
MAN M3575, MAN M3275
MB 228.31
Ford WSS-M2C171-E
Ford WSS-M2C171-F1
Cummins CES 20081
Cummins CES 20086
Cummins CES 20087
Detroit Diesel DDC 93K218
Detroit Diesel DDC 93K222
Detroit Diesel DDC 93K223
Mack EO-O Premium Plus
Mack EO-S-4.5
Volvo VDS-4.5
Volvo VDS-4
Renault RLD-4
Renault RLD-3
Deutz DQC III-10 LA
MTU DDC Type 2.1
Cat ECF-3
Tribunol Eurotruck CK-4 15W-40
Commercial vehicle engine oil of the premium class, specially developed for the latest high-performance engines, but can also be used in cars according to API. The application profile meets the long change intervals of the vehicle manufacturers and represents the current status in this SAE class. It is also for the rationalized Application predestined.
SAE 15W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 15W-40
ACEA E9/E7
API CK-4, CJ-4/SN
MAN M3575, MAN M3275
MB 228.31
Ford WSS-M2C171-E
Ford WSS-M2C171-F1
Cummins CES 20081
Cummins CES 20086
Cummins CES 20087
Detroit Diesel DDC 93K218
Detroit Diesel DDC 93K222
Detroit Diesel DDC 93K223
Mack EO-O Premium Plus
Mack EO-S-4.5
Volvo VDS-4.5
Volvo VDS-4
Renault RLD-4
Renault RLD-3
Deutz DQC III-10 LA
MTU DDC Type 2.1
Cat ECF-3
Tribunol Eurotruck Maxx LA 5W-30
Especially for Euro IV, V and VI diesel engines with modern emission control systems The outstanding application profile meets the longest replacement intervals of vehicle manufacturers. The low content of phosphorus, sulphur and sulphate ash (Low SAPS) keeps the after treatment of emissions trouble-free. Suitable for fuels with a sulphur content of up to 0.05 wt.%.
SAE 5W-30
Recommended and tested where the following specifications and filling instructions are required:
SAE 5W-30
ACEA E9/E7/E6/E4
API CJ-4
MAN M3677, MAN M3575, MAN M3477
MAN M3271-1
MB 228.51, MB 228.31
Volvo VDS-4
Renault RLD-3
Scania LDF-4, Scania LA
Deutz DQC IV-10 LA
MTU DDC Type 3.1
MTU DDC Type 2.1
Mack EO-O Premium Plus
Iveco 18-1804 Classe TLS E6
Detroit Diesel DDC 93K218
Cummins CES 20081
Caterpillar ECF-3
Tribunol Eurotruck Maxx LA 10W-40
Especially for Euro IV, V and VI diesel engines with modern emission control systems The outstanding application profile meets the longest replacement intervals of vehicle manufacturers. The low content of phosphorus, sulphur and sulphate ash (Low SAPS) keeps the after treatment of emissions trouble-free. Suitable for fuels with a sulphur content of up to 0.05 wt.%.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA E9/E7/E6/E4
API CJ-4
JASO DH-2
MAN M3477
MAN M3575, MAN M3271-1
MB 228.51, MB 228.31
Volvo VDS-4
Renault RLD-3
Cummins CES 20081
MTU DDC Type 3.1
MTU DDC Type 2.1
Mack EO-O Premium Plus
Deutz DQC IV-10 LA
Detroit Diesel DDC 93K218
Scania LA
Voith-Retarder „B“
Iveco 18-1804 Classe TLS E9
Iveco 18-1809 Classe NG2
Caterpillar ECF-3
Tribunol Eurotruck LA 5W-30
Especially for Euro IV and V diesel engines with modern exhaust aftertreatment systems such as EGR (exhaust gas recirculation), SCR (AdBlue technology) and DPF (diesel particle filter). The low content of sulphate ash (Low SAPS) keeps these exhaust gas aftertreatment systems trouble-free. Maximum oil change intervals are achieved (observe the engine manufacturer’s instructions). Suitable for fuels with a sulphur content of up to 0.5 wt.%.
SAE 5W-30
Recommended and tested where the following specifications and filling instructions are required:
SAE 5W-30
ACEA E9/E7/E6/E4
API CJ-4
MAN M3677, MAN M3477
MAN M3575, MAN M3271-1
MB 228.51, MB 228.31
Volvo VDS-4
Renault RLD-3
Scania LDF-4
Deutz DQC IV-10 LA
MTU DDC Type 3.1
MTU DDC Type 2.1
Mack EO-0 Premium Plus
Iveco 18-1804 Classe TLS E6
Detroit Diesel DDC 93K218
Cummins CES 20081
Cat ECF-3
Tribunol Eurotruck LA 10W-40
Especially for Euro IV and V diesel engines with modern exhaust aftertreatment systems such as EGR (exhaust gas recirculation), SCR (AdBlue technology) and DPF (diesel particle filter). The low content of sulphate ash (Low SAPS) keeps these exhaust gas aftertreatment systems trouble-free. Maximum oil change intervals are achieved (observe the engine manufacturer’s instructions). Suitable for fuels with a sulphur content of up to 0.5 wt.%.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA E9/E7/E6
API CI-4
MAN M3477
MAN M3271-1
MB 228.51
Volvo VDS-3
Renault RLD-2
Renault RXD
Renault RGB
MTU DDC Type 3.1
Cummins CES 20077
Cummins CES 20076
JASO DH-2
Tribunol Eurotruck LA 15W-40
Especially for Euro IV and V diesel engines with modern exhaust aftertreatment systems such as EGR (exhaust gas recirculation), SCR (AdBlue technology) and DPF (diesel particle filter). The low content of sulphate ash (Low SAPS) keeps these exhaust gas aftertreatment systems trouble-free. Maximum oil change intervals are achieved (observe the engine manufacturer’s instructions). Suitable for fuels with a sulphur content of up to 0.5 wt.%.
SAE 15W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA E9/E7/E6
API CI-4
MAN M3477
MAN M3271-1
MB 228.51
Volvo VDS-3
Renault RLD-2
Renault RXD
Renault RGB
MTU DDC Type 3.1
Cummins CES 20077
Cummins CES 20076
JASO DH-2
Tribunol Megatruck 10W-40
Low-friction engine oil of Euro III, IV and V technology for all-season use in heavy-duty commercial vehicle diesel engines. Maximum oil change intervals of up to 150,000 km (observe engine manufacturer’s instructions) and low oil and fuel consumption reduce operating costs. Suitable for fuels with a sulphur content of up to 0.5 wt.%.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA E4/E7
API CI-4
Global DHD-1
MAN M3377, MAN M3277
MB 228.5
Renault RLD-2
Renault RXD
Volvo VDS-3
MTU DDC Type 3
Cat ECF-2
Cummins CES 20078
Cummins CES 20077
Detroit Diesel DDC 93K215
Mack EO-N, Mack EO-M
Scania LDF-2, Scania LDF
DAF
Tribunol Supertruck 10W-40
Engine oil for the all-season use in highly loaded diesel engines of class Euro I, II, III and IV. The composition guarantees long oil change intervals with very high wear protection properties. Can also be used in various car engines without any problems. Suitable for fuels with a sulphur content of up to 0.5% by weight.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA A3/B4, E7
API SL/CF/CI-4
MB 228.3, MB 229.1
MAN M 3275-1
Renault RLD-2, Renault RLD
Volvo VDS-3
MTU Level 2
Mack EO-N, Mack EO-M
Detroit Diesel DDC 93K215
Cat ECF-2, Cat ECF-1a
Cummins CES 20071
Cummins CES 20072
Cummins CES 20076
Cummins CES 20077
Cummins CES 20078
Iveco, DAF
Scania LDF-2, Scania LDF
VW 501.00, VW 505.00
JASO DHD-1
Tribunol Supertruck 15W-40
Engine oil for the all-season use in highly loaded diesel engines of class Euro I, II, III and IV. The composition guarantees long oil change intervals with very high wear protection properties. Can also be used in various car engines without any problems. Suitable for fuels with a sulphur content of up to 0.5% by weight.
SAE 15W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 15W-40
ACEA A3/B4, E7
API SL/CF/CI-4
MB 228.3, MB 229.1
MAN M 3275-1
Renault RLD-2, Renault RLD
Volvo VDS-3
MTU Level 2
Mack EO-N, Mack EO-M
Detroit Diesel DDC 93K215
Cat ECF-2, Cat ECF-1a
Cummins CES 20071
Cummins CES 20072
Cummins CES 20076
Cummins CES 20077
Cummins CES 20078
Iveco, DAF
Scania LDF-2, Scania LDF
VW 501.00, VW 505.00
JASO DHD-1
Tribunol Supertruck 20W-50
Engine oil for the all-season use in highly loaded diesel engines of class Euro I, II, III and IV. The composition guarantees long oil change intervals with very high wear protection properties. Can also be used in various car engines without any problems. Suitable for fuels with a sulphur content of up to 0.5% by weight.
SAE 20W-50
Recommended and tested where the following specifications and filling instructions are required:
SAE 20W-50
ACEA A3/B4, E7
API SL/CF/CI-4
MB 228.3, MB 229.1
MAN M 3275-1
Renault RLD-2, Renault RLD
Volvo VDS-3
MTU Level 2
Mack EO-N, Mack EO-M
Detroit Diesel DDC 93K215
Cat ECF-2, Cat ECF-1a
Cummins CES 20071
Cummins CES 20072
Cummins CES 20076
Cummins CES 20077
Cummins CES 20078
Iveco, DAF
Scania LDF-2, Scania LDF
VW 501.00, VW 505.00
JASO DHD-1
Tribunol Truck 10W-40
Classes Euro I, II, III and IV engine oil for all-season use in highly loaded diesel engines, both induction and turbocharged. Selected active ingredients guarantee maximum engine cleanliness with optimum wear protection. Much longer oil change intervals can be achieved (observe engine manufacturer’s instructions). Also suitable for fuels with a sulphur content of more than 0.5 wt.%. When using such fuels with a high sulphur content, reduced oil change intervals must be carried out.
SAE 10W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 10W-40
ACEA A3/B4, E3
API SL/CF/CH-4
MB 228.3, MB 229.1
MAN M3275-1
MAN 271
Renault RD
Renault RGD
Volvo VDS
MTU Level 2
MTU Level 1
Mack EO-M+
Cummins CES 20077
Cat ECF-1a
Allison C-4
VW 501.01, VW 505.00
Tribunol Truck 15W-40
Classes Euro I, II, III and IV engine oil for all-season use in highly loaded diesel engines, both induction and turbocharged. Selected active ingredients guarantee maximum engine cleanliness with optimum wear protection. Much longer oil change intervals can be achieved (observe engine manufacturer’s instructions). Also suitable for fuels with a sulphur content of more than 0.5 wt.%. When using such fuels with a high sulphur content, reduced oil change intervals must be carried out.
SAE 15W-40
Recommended and tested where the following specifications and filling instructions are required:
SAE 15W-40
ACEA A3/B4, E3
API SL/CF/CH-4
MB 228.3, MB 229.1
MAN M3275-1
MAN 271
Renault RD
Renault RGD
Volvo VDS
MTU Level 2
MTU Level 1
Mack EO-M+
Cummins CES 20077
Cat ECF-1a
Allison C-4
VW 501.01, VW 505.00
Tribunol Truck 20W-50
Classes Euro I, II, III and IV engine oil for all-season use in highly loaded diesel engines, both induction and turbocharged. Selected active ingredients guarantee maximum engine cleanliness with optimum wear protection. Much longer oil change intervals can be achieved (observe engine manufacturer’s instructions). Also suitable for fuels with a sulphur content of more than 0.5 wt.%. When using such fuels with a high sulphur content, reduced oil change intervals must be carried out.
SAE 20W-50
Recommended and tested where the following specifications and filling instructions are required:
SAE 20W-50
ACEA A3/B4, E3
API SL/CF/CH-4
MB 228.3, MB 229.1
MAN M3275-1
MAN 271
Renault RD
Renault RGD
Volvo VDS
MTU Level 2
MTU Level 1
Mack EO-M+
Cummins CES 20077
Cat ECF-1a
Allison C-4
VW 501.01, VW 505.00
Tribunol Truck 20W-60
Classes Euro I, II, III and IV engine oil for all-season use in highly loaded diesel engines, both induction and turbocharged. Selected active ingredients guarantee maximum engine cleanliness with optimum wear protection. Much longer oil change intervals can be achieved (observe engine manufacturer’s instructions). Also suitable for fuels with a sulphur content of more than 0.5 wt.%. When using such fuels with a high sulphur content, reduced oil change intervals must be carried out.
SAE 20W-60
Recommended and tested where the following specifications and filling instructions are required:
SAE 20W-60
ACEA A3/B4, E3
API SL/CF/CH-4
MB 228.3, MB 229.1
MAN M3275-1
MAN 271
Renault RD
Renault RGD
Volvo VDS
MTU Level 2
MTU Level 1
Mack EO-M+
Cummins CES 20077
Cat ECF-1a
Allison C-4
VW 501.01, VW 505.00